Skip to main content

2010-2-PIB

Addressable fire panel accessory, Peripherals Interface Board
  • 8 supervised inputs
  • 8 supervised outputs
  • 4 relay outputs
  • Option to externally power
  • Interface to the IFAM System 3000 network
View all

At a glance

Overview

The 2010-2-PIB Peripherals Interface Board is an accessory of the small to medium size intelligent addressable life safety control systems. In total there are 4 variants of this board. The 2010-2-PIB is the most extended variant of the range and provides ways to interface other electronic equipment on site.

Functionality

The 2010-2-PIB Peripherals Interface Board provides eight inputs and outputs and four relay outputs for compatible control panels. The board is designed to support German marketplace requirements in control panels operating in VdS 2540 mode and provides an interface to the IFAM System 3000 network, fire brigade equipment, and other regional control and indicating equipment and devices. The board can be powered from the control panel or from an external power supply, providing 24 VDC to each of the supervised outputs. Inputs and outputs (excluding relay outputs) are supervised for short circuit and open circuit faults.

Mounting & connections

The board can be plugged directly on the front of the main board inside the big size control panel variants on top of the new release 3 chassis. No additional wiring is required. You can use the pluggable connectors to make your connections to the field wiring. Connect an external power supply to the board directly to reduce the load of your system.

Details

  • 8 supervised inputs
  • 8 supervised outputs
  • 4 relay outputs
  • Option to externally power
  • Interface to the IFAM System 3000 network
  • Operating in VdS 2540 mode
  • Pluggable connectors

Technical specifications

General
Compatibility
Release 3 hardware / firmware
Maximum system capacity (device count)
1 to 32
more than 160K
up to 120K
up to 128
up to 160K
up to 20K
up to 256
up to 4096
up to 512
up to 60K
up to 64
up to 96
Network size (nodes)
1 to 32
more than 128
up to 128
up to 64
Electrical
Power supply type
VDC
Operating voltage
24 VDC
Current consumption
40 mA max.(standby)
4050 mA max. (activated)
Zone
Maximum zone capacity
1 to 64
more than 1024
up to 1024
up to 256
Output
Output type and rating
500 mA at 25°C (activated)
Physical
Form factor
Large
Physical dimensions
105 x 192 mm (W x H)
Net weight
164 g
Shipping weight
240 g
Mounting type
In cabinet
Environmental
Operating temperature
+5 to +40°C
Storage temperature
-20 to +50°C
Relative humidity
10 to 95% noncondensing
Regulatory
Compliancy
CE
REACH
RoHS 3
WEEE
Certification
CPR
Standards
EN54-2, EN54-13
Input activation (VdS)
Open circuit >3.9 kOhm
Quiescent 2.2 kOhm to 3.3 kOhm
Activated 60.2 Ohm to 1.7 kOhm
Short circuit <60.2 Ohm
Input activation (standard)
Open circuit >20.2 kOhm
Quiescent 15 kOhm
Activated 60.2 Ohm to 8 kOhm
Short circuit <60.2 Ohm
End-of-line termination
Input (VdS) 2.2 kOhm to 3.3 kOhm resistor (FSD, SST,EMZ)
Input (typical) EOL 15 kOhm, 1/4 W resistor (FSE, ÜE, FAULT, configurable)
Output (typical) EOL 15 kOhm, 1/4 W resistor
Output (EN 54-13) EOL Class B (EN 54-13) device
Relay contact rating
2 A at 30 VDC
3.3 kOhm / 680 Ohm switched relay output activation
Activated 560 Ohm
Not activated 3.3 kOhm

Downloads

All downloads

Datasheet

Installation sheet

Certificates

Other EU certificate

CPD / CPR

If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.