GS960
Acoustic glass break sensor, EN Grade II
- Protection of multiple windows in a room
- Maximum detection range up to nine meters and coverage angle of 165 degrees
- 24 h supervision set-up possible
- Detect glass breaking up to triple panes
- Separate accessory for proper set-up and testing available
Related products
At a glance
General
GS960 is an acoustic glass break detector which gives an alarm when glass is smashed at intrusion attempts through windows, doors and glazed walls. It uses an advanced micro-controller technology which is programmed to take a lot of relevant acoustic factors into account. Using the Digital Room Compensation the detector can distinguish between a true glass break and other irrelevant sounds. In parallel the design of the detector makes it suitable for wall or ceiling mount as long as the detector has a free line-of-sight to the window being protected. This sensor will detect the breaking of different types of glass panes like single glazed (float and tempered), double glazed (float and tempered), double glazed where the inner pane is covered with security film, triple glazed (float and tempered) and laminated glass pane.
Connection to a 24-hour loop
The sensor is constructed for continuous detection, is extra resistant to different acoustic disturbances and works well in most environments. In environments with very high rates of disturbances like e.g. industrial workshops or gyms, the oKGSome of a four week test period will help to decide whether to use the detector in a 24 hour loop.
Special Tools and Accessories
The GS960-TR tester is a specially developed tool for calibrating and adjusting the GS960 for optimal function in the acoustic space ; the DRC Digital Room Compensation procedure. Using this tool to test the detector settings you do not need to open it again as the tester will communicate with the detector acoustically. There is also an additional accessory GS960-RB which is a plug-in EOL resistor board allowing to easily integrate GS960 into an existing Advisor Advanced system without the hassle of adding EOL resistors.
Details
- Protection of multiple windows in a room
- Maximum detection range up to nine meters and coverage angle of 165 degrees
- 24 h supervision set-up possible
- Detect glass breaking up to triple panes
- Separate accessory for proper set-up and testing available
- 24/7 internal self-test procedure
- Holding several European security approvals
Technical specifications
| General | ||
|---|---|---|
| Technology |
Acoustic
|
|
| Glass types |
Laminated
Tempered
|
|
| Range |
9 m radius at 165° (Zone 1: 4 to 9 m Zone 2: 2 to 4 m Zone 3: 1 to 2 m)
|
|
| Relay output |
50 mA, 50 V DC / peak AC, Rs < 30 Ohm
|
|
| Tamper switch |
Yes
|
|
| Type (thickness protected glass) | Float (4 mm), laminated P2, P4 (4 mm + 4 mm) | |
| Size of protected glass | 400 x 400 mm minimum | |
| Wired/wireless | ||
|---|---|---|
| Wired-wireless |
Wired
|
|
| Electrical | ||
|---|---|---|
| Operating voltage |
7 to 30 VDC
|
|
| Current consumption |
max. 8.9 mA at 12 V, max. 5.9 mA at 24 V
|
|
| Max. voltage ripple | 2 Vp-p at 12 V, 4 Vp-p at 24 V | |
| Voltage monitoring | Fault signaled at < 7 V | |
| D/N signal levels | DAY: D/N open or < 2.5 V, NIGHT: D/N > 2.5 V | |
| Intrusion/fault indication | LED | |
| Physical | ||
|---|---|---|
| Physical dimensions |
68 x 109 x 40 mm
|
|
| Net weight |
96 g
|
|
| Shipping weight |
116 g
|
|
| Colour |
White
|
|
| Material |
ABS plastic
|
|
| Mounting type |
Ceiling mount
Wall mount
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
+5 to 40°C
|
|
| Relative humidity |
93% max.
|
|
| Environment |
Indoor
|
|
| Regulatory | ||
|---|---|---|
| Certification |
VdS
|
|
Downloads
All downloadsDatasheet
Installation sheet
Other EU certificate
Other EU certificate
G118504_EN
Other EU certificate
S190530
Other EU certificate
S190728
Other EU certificate
G118504
Other EU certificate
GD-10132/18
Other EU certificate
B-503-0081/B
Other EU certificate
GS-H 190617/23 E
Certificates
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.